Strong potential for inorganic perovskites

Scientists in the United States have developed a method to compare the performance and number of defects in different perovskite cell materials. Based on simulations and work with prototype materials, the group finds that all-inorganic materials have higher potential efficiency than their more widely researched organic-inorganic counterparts.

October 15, 2021

Most of the impressive achievements seen so far with perovskite solar cells have been made by scientists working with organic-inorganic perovskite materials – most often combining iodine and lead with organic molecules containing hydrogen and carbon (most often methylammonium and formamidinum).

The organic elements are thought to be essential in limiting formation of defects in the material, and in allowing for the simple, low-temperature manufacturing processes that make perovskites so attractive to the PV industry. These molecules also, however, are at the root of many of the challenges keeping perovskites from large-scale use, and can break up entirely resulting in serious performance loss.

And just as environmental concerns have led scientists to trial replacing lead with other materials, investigating alternatives to the organic molecules could be one way to solve the problem. Cesium has proven to have strong potential as a replacement, although a large part of the research community continues to focus on organic-inorganic perovskite materials.

Efficiency potential

Scientists led by the University of California Santa Barbara developed a method to compare the potential of different perovskite compositions, and found that all-inorganic materials have the potential for better solar cell performance than those using the organic material.

“To compare the materials, we performed comprehensive simulations of the recombination mechanisms,” explained UC Santa Barbara scientist Xie Zhang. “When light shines on a solar-cell material, the photo-generated carriers generate a current; recombination at defects destroys some of those carriers and hence lowers the efficiency. Defects thus act as efficiency killers.”

Popular content

The group’s calculations are described in full in the paper All inorganic halide perovskites as candidates for efficient solar cells, published in Cell Reports Physical Science. They compared a cesium-based perovskite with one containing methylammonium, and concluded that the presence of organic materials actually increases the chance of defects appearing in the material, and introduces challenges that disappear when it is replaced with cesium. “We believe that the prospects of using CsPbI3 for efficient solar cells may have been significantly underrated; its optoelectronic performance actually surpasses that of the hybrid perovskites from a nonradiative recombination point of view.”

Manufacturing

One of the reasons inorganic perovskites have so far taken a backseat is that actually fabricating them is more challenging. The UCSB scientists, however, note that other recent research suggests that this could be overcome, and with the knowledge that better efficiencies can be achieved this way, scientists could increase their efforts working on processes for all-inorganic perovskite fabrication.

“We hope our results will inspire further experimental work on developing effective strategies to stabilize CsPbI3 in the perovskite structure, thus enabling a new pathway to making highly efficient perovskite solar cells,” the group concludes.

This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.

This post appeared first on PV Magazine.

Share This Post

Share on linkedin
Share on twitter
Share on email