From pv magazine USA
In order to clean the U.S. power grid, wind, solar and energy storage professionals will need to deploy more than a terawatt of additional clean electricity capacity.
No problem, drill sergeant! The developers are at the ready!
According to power plant waiting lists around the country, more than half of the generation we need is already in queue. But curb your enthusiasm: The power grid isn’t yet ready to take on these projects, and many of them won’t be built.
What matters most is not the low rate of project completion, but that this emerging data sends the signal that developers have already completed reconnaissance on more than half the sites needed to reach our clean electricity goals.
The U.S. Department of Energy’s Electricity Markets and Policy Group at Berkeley Lab (EMP) has released new data tools that summarize the proposed projects in the nation’s power grid interconnection queues. The queues represent 85% of the country’s electricity sales.
Included within this release is a data-rich interactive tool, a graphic slide deck discussion, and the cumulative queue data itself. The key figures show that we have more than 750 GWac of electricity generation capacity in the queue, and 90% of that is clean energy-related.
More recently, added capacities from renewable electricity sources have completely dominated the queue. The chart below was taken from the interactive data tool. It shows that gas represents the only fossil capacity added since 2016. Solar and solar+battery dominated new capacity in 2020.
With a total of 462 GWac, solar accounts for the largest share of generator capacity in the queues. Applying the standard 1.25 module-to-inverter ratio results in 577 GWdc of solar capacity. Currently, installed U.S. solar capacity is just over 100 GWdc.
Wind, at 209 GWac, represents the second-largest capacity volume in the queue. Offshore wind represents 61 GWac of that amount, having started from almost zero last year.
With both the east and west coasts embracing offshore wind, and with technological advancements like floating wind, we could hypothetically power the whole of the United States. Expect this capacity to grow massively in future reports.
And while there is no nuclear, coal, or “other” capacity to speak of, there is 74 GWac of natural gas capacity in the queue. pv magazine USA has reported that while substantial volumes of new fossils are built annually, there has been zero net new fossil capacity since the mid 2000s. New gas capacity primarily replaces dirtier, less flexible, and more expensive coal capacity.
Energy storage volume
In addition to the generation hardware, the queue now holds greater than 200 GW of energy storage. The capacity value – the number of consecutive hours that 200 GW can be delivered – is not yet publicly available. The greatest number of projects may involve four-hour batteries, but there are many shapes and sizes in our current market.
The real energy storage story isn’t volume, but rate of growth. At the end of 2019, storage power capacity stood at 50 GW. By the end of 2020, that number had ballooned to 400%.
A little over half of all energy storage capacity is coupled with solar and wind power. A recent analysis by the EMP team suggests that there would be significantly less coupling without the IRS’s Investment Tax Credit, which applies to batteries when they’re paired with solar.
The absolute volume of energy storage in the queue is probably between 400 and 800 GWh. That might seem small compared to full-year electricity use of 4,000,000 GWh. However, that potential 800 GWh provides nearly two of the 12 hours of energy storage that is needed for the U.S. power grid to reach 80% wind plus solar.
Remember, although we can meet U.S. electricity needs with a 100 km x 100 km square placed out in the desert, we don’t need to. In addition to eye-popping utility scale capacity volumes, we are also seeing significant volumes of solar built on residential and commercial rooftops.
For instance, New York, Pennsylvania, Massachusetts, and Virginia all have solar power programs deploying systems up to 5 MWac. The queue data from EMP shows fewer than a dozen 5 MWac projects in Pennsylvania, while is now at least 1 GW of projects submitted.
Furthermore, every single year we install a growing volume of residential and nonresidential (commercial) projects. These two segments on their own just broke 5 GWdc for the first time in 2020. Projected out, that would mean adding more than 100 GW by 2035.
Two documents, – a 2030 analysis calculating what’s needed to meet our goal of an 80% clean power grid, and the Biden administration’s 2035 goal of a 90% clean power grid – suggest that we need 950 GW and 1,100 GW, respectively, of solar and wind capacity.
The EMP queue volumes today represent 61% and 71%, respectively, of the capacity required to hit those 2030 and 2035 targets. The largest developers know that much of what is in their queue today won’t be built by then; however, there’s a long way to go.
NextEra – one of the largest solar developers in the United States, and possibly the largest member of the queue – has stated in quarterly financial earnings calls that there is much more development capacity potential in its pipeline than the gigawatts disclosed in its quarterly earnings reports. This capacity will be unlocked, the company said, when and if financial and political conditions support it.
Considering that President Biden announced a federal goal of 100% clean electricity by 2035, along with a clean energy standard, we should expect to see queue numbers continue to grow. If projected submission-to-completion rates remain as low as they currently are, then we should expect to see truly massive volumes – terawatt plus – enter the queue.
What actually gets built … well, that’s yet to be determined.
This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: firstname.lastname@example.org.
This post appeared first on PV Magazine.