Roll-out solar arrays installed in successful NASA spacewalk

From pv magazine USA

Astronauts Shane Kimbrough of NASA and Thomas Pesquet of the European Space Agency (ESA) have completed their spacewalk upgrade of the international space station, installing the new iROSA roll-out solar arrays 

The duration of the spacewalk was scheduled to last six and a half hours, and ended up totaling seven hours fifteen minutes, with the astronauts utilizing their battery-powered suits to traverse the exterior of the station. 

It cost about $100 million to install the six arrays, which were produced by US manufacturer and space infrastructure technology company Redwire Space, Inc. The arrays have a capacity of 120 kW and will increase the station’s power generation by 20-30%.  

Popular content

The previous arrays had been designed for a 15-year service life, but had been continually operating since December 2000. Although they were functioning well, the older arrays were showing signs of degradation.

Before the new array can begin supplying power, the spacewalkers will need to install electrical cables and drive the final two bolts, thus allowing the panels to unfurl into the deployed position. This will take place on June 20th, and can be viewed live on NASA’s website. 

This is the third spacewalk Kimbrough and Pesquet have conducted in tandem, following two 2017 expeditions in which the astronauts replaced the orbiting laboratory’s nickel-hydrogen batteries with new lithium-ion batteries. 

This content is protected by copyright and may not be reused. If you want to cooperate with us and would like to reuse some of our content, please contact: editors@pv-magazine.com.

This post appeared first on PV Magazine.

Share This Post

Share on linkedin
Share on twitter
Share on email