New CIGS solar cell design with antimony trisulfide promises 31.15% efficiency

The novel solar cell uses antimony trisulfide (Sb2S3) as the back surface field (BSF) layer. According to its creators, this layer can be included in conventional CIGS solar cells to improve their efficiency and reduce the absorber material’s cost.

An international group of scientists has proposed a new copper indium gallium selenide (CIGS) solar cell structure using antimony trisulfide (Sb2S3) as the back surface field (BSF) layer.

Sb2S3 is a promising candidate for the photovoltaic community owing to the earth-abundant and environmentally friendly constituent elements alongside appropriate optoelectronic properties such as a desirable band gap of around 1.7 eV, large absorption coefficient and long-term stability

BSF layers consist of a higher doped region at the rear surface of the solar cell and are commonly used to increase a device’s voltage. “Sb and S are abundantly available on Earth. Hence, incorporating a thick layer of Sb2S3 in industrial CIGS solar cells can effectively reduce their production costs,” the researchers said. “By reducing the thickness and cost of the CIGS absorber layer, this approach promises to make solar energy more accessible and sustainable.”

They numerically simulated and optimized the solar cell via the SCAPS1D solar cell capacitance software, developed by the University of Ghent, to simulate the novel cell design.

The academics fabricated the cell with a back contact layer made of nickel (Ni), the Sb2S3-based BSF layer, a CIGS absorber, an electron transport layer (ETL) made of tin disulfide (SnS2), a window layer based on fluorine-doped tin oxide (FTO), and a front electrode made with aluminum (Al).

In the simulation, the researchers optimized the thicknesses of the buffer, absorber, and BSF layers. They also investigated acceptor density, defect density, capacitance–voltage (C–V), interface defect density, rates of generation and recombination, operating temperature, current density, and quantum efficiency.

Thickness layer, and (b) The impact of the acceptor density

Image: Begum Rokeya University, RSC Advances, CC BY 3.0 DEED

“After details optimization, the optimal thicknesses for the FTO window, CIGS absorber, SnS2 buffer, and Sb2S3 BSF layers are found to be 0.05 μm, 1.0 μm, 0.05 μm and 0.20 μm, respectively,” the group said. “The large thickness of buffer creates the series resistance and absorption losses in the solar cell structure. Since the buffer allows light to enter the solar cell device, so excellent transparency and the right thickness are needed, which is the 0.05 mm for SnS2 buffer in our proposed structure.”

With those optimized parameters, the simulated double heterojunction (DH) cell exhibited a power conversion efficiency of 31.15%, an open-circuit voltage of 1.08 V, a short-circuit current density of 33.75 mA cm2, and a fill factor of 88.50%. A reference CIGS cell optimized and simulated without the Sb2S3 BSF layers achieved an efficiency of 22.14%, an open-circuit voltage of 0.91 V, a short-circuit current density of 28.21 mA cm2, and a fill factor of 86.31%.

“The outcomes of this study provide insights into the development of an ultra-thin Sb2S3 BSF layer, which can be included in conventional CIGS solar cells to improve their efficiency and reduce the absorber material’s cost,” the group concluded.

Its findings and the solar cell concept were presented in the study “Improving the efficiency of a CIGS solar cell to above 31% with Sb2S3 as a new BSF: a numerical simulation approach by SCAPS-1D,” published in RSC Advances. The team included scientists from Bangladesh’s Begum Rokeya University, Hajee Mohammad Danesh Science and Technology University and Pabna University of Science and Technology, as well as from Mexico’s Autonomous University of Querétaro, Iraq’s Al-Karkh University of Science, and Saudi Arabia’s King Khalid University.

This post appeared first on PV Magazine.

Share This Post